Mineral Processing
Hillhead Success for Bunting
The Hillhead quarrying, construction and recycling show (Buxton, UK, 25-27 June, 2024) was blessed with a decent spell of weather for the throngs of international visitors. Bunting’s ideally located stand, on the downslope towards the pavilion, was busy for the whole 3-days. Bunting has exhibited at Hillhead for decades, with metal detectors, magnetic separators and…
Read MoreBunting ElectroMax-Plus Protects Aggregate Crushers
A UK construction materials company installed an ElectroMax-Plus Overband Magnet to remove tramp ferrous metal from quarried material prior to crushing. Bunting specified, designed and built the powerful electromagnetic Overband Magnet at their UK manufacturing facility in Redditch. The ElectroMax-Plus Installation The ElectroMax-Plus Overband Magnet is installed at magnesium limestone quarry in Derbyshire, United Kingdom. …
Read MoreHigh Intensity Magnetic Separation at UK Mining Conference
High intensity magnetic separation and enhanced tramp metal magnetic separation is the focus for Bunting at the UK Mining Conference in Cornwall, UK (12-13 June 2024). High-profile delegates including investors, brokers, operators, and the mining supply chain attend the two-day conference, held at the historic Princess Pavilion in Falmouth in Cornwall. The recent rise in…
Read MoreElectroMax Overband Magnet Power at Hillhead 2024
The compact but powerful characteristics of the ElectroMax Overband Magnet are highlighted on Bunting’s stand C9 at the Hillhead quarrying, construction and recycling show (25-27 June, 2024). The ElectroMax is accompanied on the stand by the TN77 and meTRON 05D metal detectors, and a permanent suspension magnet. Solving Metal Separation Problems at Hillhead Magnetic separators…
Read More120 ElectroMax Overbands Sold in Five Years
April 2024 marks five years since the launch of the ElectroMax Overband Magnet and, in that period, Bunting has built and shipped 120 units for a value exceeding £3 million. The ElectroMax Overband Magnets provide the enhanced separation of ferrous metal from conveyed material in recycling plants, mines, and quarries, bulk handling terminals, and power…
Read MoreHigh-Intensity Magnetic Separation at Ceramitec 2024
High-intensity magnetic separators reduce rejects, rework, and increase ceramic whiteness. On Bunting’s stand A6 323D at Ceramitec 2024 (9-12 April, Munich, Germany), ceramic engineers and ceramic mineral processors can find out about the latest high-intensity magnetic separation technology for both wet and dry processes. Keeping Ceramic Glazes, Slips and Bodies Free of Magnetics Fine iron…
Read MorePermanent Overband Magnet Selection Criteria
Permanent Overband Magnets are commonplace in most mines and quarries, removing tramp ferrous metal and protecting crushers, screens and conveyors against damage. Overband Magnets are also widely used in recycling, recovering ferrous metals and protecting shredders against metal damage. However, there are many different designs of Permanent Overband Magnet, developed to suit specific applications. Understanding…
Read MoreWhere to see Bunting-Redditch in 2024
Bunting’s magnetic separators, eddy current separators, metal detectors, and electrostatic separators are on tour again in 2024. As of January 2024, Bunting-Redditch is exhibiting at the following shows and conferences: Ceramitec 2024 (9-12 April 2024 – Munich, Germany Ceramitec is the leading international trade fair for the ceramics industry. Ceramic engineers and specialists convene from…
Read MoreHigh Intensity Magnetic Separation at XVIII ECerS
The XVIIIth Conference of the European Ceramic Society takes place in Lyon, on 2-6 July 2023. On stand 19, Bunting is highlighting the necessity of using high-intensity magnetic separators to remove iron, iron-bearing and paramagnetic minerals to reduce defect rates and improve surface brightness. Paramagnetic Minerals and Fine Iron Contamination Materials used in the manufacture…
Read MoreUniversity of Birmingham Students Visit Bunting-Redditch
Second year Chemical Engineering students from the University of Birmingham visited Bunting’s Redditch manufacturing facility to gain a better understanding of the UK’s strong engineering and manufacturing sector. The BEng Chemical Engineering course at the University of Birmingham aims to develop the theoretical knowledge and practical skills needed for a successful career in chemical engineering. …
Read More