Where to see Bunting-Redditch in 2024

Bunting’s magnetic separators, eddy current separators, metal detectors, and electrostatic separators are on tour again in 2024.  As of January 2024, Bunting-Redditch is exhibiting at the following shows and conferences: Ceramitec 2024 (9-12 April 2024 – Munich, Germany Ceramitec is the leading international trade fair for the ceramics industry. Ceramic engineers and specialists convene from…

Read More

Vital Metal Recovery from Household Waste

Eddy Current Separator at Parry & Evans

Article first published in Skip & Waste (October 2023) Metal recovery and recycling from waste is not new, with evidence of such activity in Roman times.  In modern recycling plants, metal recovery provides a vital financial lifeline.  Bunting assists waste management companies in maximising metal recovery whilst maintaining high purity levels. Ferrous Metal Recovery The…

Read More

Physical Metal Separation at ICBR 2023

Applying physical metal separation technology, such as magnetic and electrostatic separation, is the focus for Bunting at the International Congress for Battery Recycling – ICBR (6-8 September, Valencia, Spain).  On booth 17, Bunting’s team of specialist engineers are highlighting technological advances to overcome the challenges of separating and recovering critical metals present in batteries. ICBR…

Read More

Keeping Plastic Metal-Free at PLAST 2023

Separating and detecting problematic metal contamination is the focus for Bunting at PLAST 2023 (5-8 September 2023, Milan, Italy).  Live demonstrations on stand B172 in hall 13P will show equipment including metal detectors, eddy current separators and drawer filter magnets removing metal from virgin and recycled plastic. PLAST, held in Milan, Italy every three years,…

Read More

Metal Separation from Plastic Flake

Bunting Eddy Current Separator Module

A UK plastic recycler has installed a Bunting Metal Separation Module to separate ferrous and non-ferrous metal from plastic flake.  The Metal Separation Module features Vibratory Feeders, a Drum Magnet, and an Eddy Current Separator. The successful recycling of plastic waste is often hindered by the presence of contamination, including ferrous and non-ferrous metals.  In…

Read More

Metal Recovery Solutions at E-Waste World Conference 2023

Non-Ferrous Metal recovered on an Eddy Current Separator

The effective recovery of valuable metals is an important step in the economic viability of recycling e-waste.  Technology that maximises metal recovery and purity is the focus for Bunting on stand 110 at the E-Waste World Conference & Expo (28-29 June 2023, Frankfurt, Germany). The Bunting team is joined on the stand by local representative…

Read More

Bunting at Plastics Recycling World Expo 2023

Drawer Filter Magnet at Ecovyn

The effective separation of ferrous and non-ferrous metal is a key stage in the successful recycling of plastic and plastic containers. On stand B929 at the Plastics Recycling World Expo Europe (14-15 June, Messe Essen, Germany), Bunting is displaying and discussing proven metal separation technology including FF Drawer Filter Magnets and Eddy Current Separators. The Plastics…

Read More

University of Birmingham Students Visit Bunting-Redditch

University of Birmingham Chemical Engineering students visit Bunting

Second year Chemical Engineering students from the University of Birmingham visited Bunting’s Redditch manufacturing facility to gain a better understanding of the UK’s strong engineering and manufacturing sector. The BEng Chemical Engineering course at the University of Birmingham aims to develop the theoretical knowledge and practical skills needed for a successful career in chemical engineering. …

Read More

Metal Recovery at IERC 2023

Waste Electrical and Electronic Waste (WEEE)

Technology enabling the separation and recovery of small and often fine metal is important when recycling electronics.  On stand 33 at the 21st International Electronics Recycling Congress IERC 2023 (January 18-20, Salzburg, Austria), Bunting’s technical team will highlight the rise in the use of specialist metal separators including the ElectroStatic Separator, Eddy Current Separator, and…

Read More

Record-Breaking Year for Bunting-Redditch

Eddy Current Separator Module under construction at Bunting Redditch

Bunting-Redditch registered a record-breaking sales output in 2022.  Despite the global economic challenges, the demand for Bunting’s metal separation equipment has never been higher.  Equipment sales to companies in the recycling, plastics, mining, and mineral processing sectors drove sales growth in the year. “The extension to our premises [in 2020-2021] has enabled us to make…

Read More