Posts Tagged ‘Metal Detector’
Ensuring In-House Plastic Recycling Purity
When re-processing in-house plastic rejects and waste, the purity of the final recycled plastic mix must be equal or at least very close to the original raw material. Whether the re-processed plastic is for in-house use or as regrind for resale, the removal of any metal contamination is critical. Successful removal of metal contamination from…
Read MoreMetal Detectors Detecting More Than Treasure
The BBC television series Detectorists has significantly increased the public’s awareness of metal detectors, but many people remain unaware of their importance in the recycling of waste materials. Although the size and design of metal detector used in the recycling industry is different to those used by the enthusiasts on the television show, the basic…
Read MoreGetting Metal Out of Processed Vegetables
Magnetic Separators and Metal Detectors in a vegetable processing plant
Read More8 Metal-in-Food Alerts in 2019
In 2019, the UK Food Standards Agency issued 8 food alerts relating to food contaminated with metal particles. The products included turkey dinosaurs, crispy onions, Quorn sausages, corned beef, halva, an oat drink, and prepared vegetables. Up to the 9th March 2020, there have been three: Co-op recalls Chicken & Stuffing Sandwich because it may…
Read MoreThree High Sensitivity Metal Detectors for Nappies
An Egyptian paper mill has purchased three meTRON 07 CI Metal Detectors mounted on conveyors to detect metal in the tissue paper used as the filler in the manufacture of baby’s disposable nappies. The three meTRON Metal Detectors are identical in size and specification. Each has a 400mm wide belt passing through a 450mm wide…
Read MoreThree Metal In Food Safety Alerts
Between July and November 2019, the UK Food Standards Agency has issued three food alerts regarding metal contaminated food products. This brings the total number of metal-in-food contamination alerts to eight for 2019. This is a rise from four in 2018 and six in 2017. In all cases, the Food Standards Agency stated that ‘The…
Read MoreMetal Separation Attracts Visitors at RWM19
Visitors to RWM19 heard and then saw metal being separated on Bunting’s stand P1 as soon as they walked into the show. “Visitors to the RWM19 exhibition wanted to see equipment in action. The clattering noise of separating metal was enough to ignite their imagination and draw them to the stand,” explained Adrian Coleman, the…
Read MoreAmerican Quarries Install TN77 Metal Detectors
TN77 Metal Detectors are proving popular with quarry operators in the USA. The industrial Metal Detectors identify tramp metal in conveyed aggregate and prevent damage to screens and crushers. The TN77 metal detector is a tunnel-type Metal Detector used widely in the quarrying, mining and recycling industries where the conveyed material is non-metallic or non-conductive. …
Read MoreDetecting and Removing Tramp Metal from Conveyors
The process of quarrying aggregate and mining ore often results in the introduction of tramp metal. The effective detection and removal of this tramp metal is critical to prevent damage to crushers, screens and conveyors, and is achieved using metal detectors and magnetic separators. The design of metal detector or magnetic separator is dependent upon…
Read MoreNew Export Opportunities at Bauma 2019
Throughout the whole 7 days, the Bunting stand at Bauma 2019 buzzed with visitors. Mineral separation demonstrations on the Rare Earth Roll Magnetic Separator ignited curiosity and stimulated questions. The new ElectroMax Overband Magnet, proudly displayed at the front of the stand, drew visitors and the media. There was particular interest in the heavy duty,…
Read More