Posts Tagged ‘Metal Recycling’
ElectroStatic Separators Destined for Australia
Bunting Magnetics has designed and built two ElectroStatic Separators for a metal recovery company based in Australia. The metal separation technology will recover precious metals from shredded printed circuit boards. The electrostatic separator provides the only known method of removing or recovering metals from certain recycled materials. Separation occurs by inducing an electrostatic charge into…
Read MoreEnhanced Metal Recovery with Bunting at IFAT 2024
Technology to effectively separate large and small ferrous and non-ferrous metal is the focus for Bunting at IFAT Munich 2024 (Messe Munchen, Germany, May 13-17). Advanced designs of magnetic separators, eddy current separators and electrostatic separators separate strongly and weakly magnetic particles, enabling the successful recycling of a wide range of waste materials. On stand…
Read MoreLaboratory High-Intensity Magnetic Separator for Battery Recycling Research
A European mining and technology university has purchased a laboratory-scale Bench Induced Roll Magnetic Separator (BIRS) for use in research projects including the recycling of lithium-ion batteries. The BIRS generates high-intensity magnetic fields up to 2 Tesla (20,000 Gauss), enabling the separation of weakly magnetic particles. The Induced Roll Magnetic Separator (IRS) The Induced Roll…
Read MorePhysical Metal Separation at ICBR 2023
Applying physical metal separation technology, such as magnetic and electrostatic separation, is the focus for Bunting at the International Congress for Battery Recycling – ICBR (6-8 September, Valencia, Spain). On booth 17, Bunting’s team of specialist engineers are highlighting technological advances to overcome the challenges of separating and recovering critical metals present in batteries. ICBR…
Read MoreMetal Recovery Solutions at E-Waste World Conference 2023
The effective recovery of valuable metals is an important step in the economic viability of recycling e-waste. Technology that maximises metal recovery and purity is the focus for Bunting on stand 110 at the E-Waste World Conference & Expo (28-29 June 2023, Frankfurt, Germany). The Bunting team is joined on the stand by local representative…
Read MoreTom Higginbottom Joins the Young British Metals Recyclers Committee
Bunting Technical Sales Engineer, Tom Higginbottom, has joined the British Metal Recyclers Association’s Young British Metals Recyclers (YBMR) committee. The Young British Metal Recyclers Association meets up to four times annually and focuses on events, networking and training opportunities for members under 40 years of age. The YBMR provides members with learning and development along…
Read MoreMetal Recovery at IERC 2023
Technology enabling the separation and recovery of small and often fine metal is important when recycling electronics. On stand 33 at the 21st International Electronics Recycling Congress IERC 2023 (January 18-20, Salzburg, Austria), Bunting’s technical team will highlight the rise in the use of specialist metal separators including the ElectroStatic Separator, Eddy Current Separator, and…
Read MoreRecord-Breaking Year for Bunting-Redditch
Bunting-Redditch registered a record-breaking sales output in 2022. Despite the global economic challenges, the demand for Bunting’s metal separation equipment has never been higher. Equipment sales to companies in the recycling, plastics, mining, and mineral processing sectors drove sales growth in the year. “The extension to our premises [in 2020-2021] has enabled us to make…
Read MoreBunting Builds Monster Stainless Steel Separator
The latest Stainless Steel Separation Conveyor (SSSC) leaving Bunting’s manufacturing facility in Kansas, USA is the largest built so far. The model SSSC 12-24-462 may only be 0.61 metres wide but sits at the end of an 11.6-metre-long conveyor. The high-intensity magnetic separator is destined for installation in an automotive recycling plant in North Carolina.…
Read MoreZixtel Evolves with Bunting’s Eddy Current Separator
The Zixtel evolution began in the midst of the global pandemic in 2020, when the company changed their focus to recycling and purchased the Bunting Metal Separation Module. Zixtel Ltd have since developed a reputation for metals recovery from a wide range of waste electrical and electronic equipment (WEEE) and waste discarded by other recycling…
Read More