Posts Tagged ‘Overband Magnet’
Global Waste Challenge
The global waste problem has never been more acute. There is a continued drive towards a throw-away society, encouraging consumers to purchase newly manufactured goods. This creates unprecedented amounts of waste, much of which cannot be reused or recycled. The issue of waste is now a headline story across the planet. Through television programmes and…
Read MoreFocus on Metal Recovery at RWM 2019
The focus on the Bunting stand at RWM 2019 (11 & 12 September, NEC, Birmingham, UK) is recovering and separating metals from secondary ‘waste’ materials. Working production-sized metal separators separating metals are on display on stand P1, right by the entrance to the show. Recycling has never had a higher profile. The ongoing backlash against single-use…
Read MoreDetecting and Removing Tramp Metal from Conveyors
The process of quarrying aggregate and mining ore often results in the introduction of tramp metal. The effective detection and removal of this tramp metal is critical to prevent damage to crushers, screens and conveyors, and is achieved using metal detectors and magnetic separators. The design of metal detector or magnetic separator is dependent upon…
Read MoreElectroMax Overband Magnet Launched At Bauma
Master Magnets ElectroMax Overband Magnet at Bauma Master Magnets is launching a new low-profile Electro Overband Magnet called the ‘ElectroMax’ at Bauma 2019 (Munich, Germany 8-14 April, 2019 – Stand 133 in Hall B2). The ElectroMax range is 185% stronger than equivalent Permanent Overband Magnets and also 25% lighter. The development in response to customer’s…
Read MoreMineral Processing & Magnetic Separators, Bauma 2019
The latest generation of high intensity Magnetic Separators will be on display on the Bunting Magnetics and Master Magnets stand (Hall B2 Stand 133) at Bauma 2019. The metal and mineral separators are used widely in the mineral processing, quarrying and recycling industries. Also, a new design of Magnetic Separator is being launched at the…
Read MoreSkip Hire Magazine Visits Master Magnets
A visit from Scott Golland and Richard Hollis from Skip Hire Magazine provided us with an ideal opportunity to update them on exciting developments at our Redditch plant. Following announcing a 25% growth in sales in 2018 on 2017, we have started the year strongly with three (3) orders for Stainless Steel Magnetic Separators. Skip Hire…
Read More2018 Review
A Look Back at our News & Blogs in 2018 2018 proved to be another exciting year. Despite the spectre of BREXIT, business overseas continued to flourish and grow. We attended a number of international exhibitions, securing orders on the stand. There have also been concerns on the UK mainland about waste management and especially…
Read MoreCelebrating Recycling Success for Recycle Week
The 2018 Recycle Week takes place between the 24th and 30th September. Originally conceived 15 years ago, Recycle Week is a celebration of recycling, organised by WRAP under the Recycle Now brand. To celebrate Recycle Week we want to highlight 4 projects where we have helped recycling companies either recover metals or cleanse recycled materials…
Read MoreDemonstrations Attract Visitors at RWM18
When visitors entered the main hall at this year’s RWM Exhibition, their attention was immediately drawn to Metal Separation equipment operating on the Master Magnets and Bunting Magnetics Europe stand. The stand was the largest exhibiting Magnetic Separators and Eddy Current Separators at the show. “With our stand being in prime position as visitors entered…
Read More3 UK Waste Recycling Facts
Latest 2016 Waste Recycling DEFRA Data The UK’s largest recycling exhibition, RWM, takes place on the 12th and 13th September 2018 (NEC, Birmingham, UK). Leading up to the show, we wanted to review three key facts from the latest DEFRA data on waste and recycling, published in February 2018 and reviewing information from 2016 (the…
Read More