Posts Tagged ‘Eddy Current Separator’
EMR Team’s Metal Separation Training
A team from leading European metal recyclers European Metal Recycling (EMR) visited Bunting’s Customer Experience Centre in Redditch, UK to see demonstrations on the latest metal separation equipment. The team included students, new employees, and a research and development engineer. EMR is a global leader in the management of sustainable materials, investing in cutting-edge technology…
Read MoreParry & Evans Recover Metal with Bunting Magnetic Separators
Recycling specialist Parry & Evans has installed Bunting magnetic separators to recover metal from pre-sorted domestic waste. At their Deeside plant in the United Kingdom, the company uses a Permanent Overband Magnet to recover ferrous metals such as steel food cans, and an Eddy Current Separator to reclaim valuable aluminium including drinks cans. Parry &…
Read MoreEddy Current Separator Pre-Shipment Material Tests
Although every Eddy Current Separator is fully mechanically tested prior to shipment, conducting material tests on a large triple-stage metal separation module complete with walkways and stairways was a challenge. A significant area of the Bunting-Redditch shopfloor was allocated to the assembly of the Metal Separation Module, which included three Vibratory Feeders, two Drum Magnets,…
Read MoreFine Metal Recovery with Bunting at RWM & Letsrecycle Live
Separating and recovering fine metals is Bunting’s focus at the RWM & Letsrecycle Live show (14-15 September 2022, NEC Birmingham, UK). On stand R-N50, visitors will see metal separation equipment in operation recovering fine non-ferrous metals and stainless-steel. On the stand is an Eddy Current Separator, SSSC Stainless Steel Separator, and an ElectroStatic Separator. With…
Read MoreRecovering Metal with Bunting at IFAT 2022
Advanced separation technology enabling enhanced metal recovery is the focus of Bunting’s stand B6-452 at IFAT 2022 (Messe Munchen, Germany, May 30 – June 3). Technology, such as the patented SSSC Stainless Steel Separator, uses ultra-high magnetic fields to recover metals previously lost to waste. The new ElectroStatic Separator segregates conductive metals using electrostatic charges. …
Read MoreSeparating Metal When Recycling Wood
Wood is one of the most recyclable materials of all waste. Waste wood originating from well-used wooden products such as pallets and furniture is reused in furniture, in creating building materials, animal bedding, and fuel. However, both ferrous and non-ferrous metal contaminates wood from secondary sources. Wood Recyclers Association Separating Metal Contamination Problematic metal contamination…
Read MoreEddy Current Separator and ElectroMax Sales Growth in 2021
The demand for metal separators increased in 2021 on 2020, with exceptional growth in sales of both Eddy Current Separators and ElectroMax Overband and Suspension Magnets. Sales growth followed an expansion in representation in overseas markets and increasing manufacturing capacity at Bunting’s Redditch facility in the UK. At the Redditch manufacturing plant, Bunting specialise in…
Read MoreMetal Recovery from Aluminium Dross
An aluminium dross processing plant in the Middle East has purchased an Eddy Current Separator, Drum Magnet and ElectroStatic Separator to recover the valuable metal. The separation equipment was designed and built by Bunting at their Redditch manufacturing facility in the United Kingdom. Controlled Tests of Aluminium Dross Samples Aluminium dross is a byproduct of…
Read MoreAdvanced Metal Separation at E-Waste World
The separation and recovery of fine and small metal is vital for the successful recycling of e-waste. On stand 314 at the E-Waste World Conference & Expo (30 November – 1 December 2021, Frankfurt Messe, Germany), Bunting is showcasing advanced metal separation technology specifically used in the recycling of electronics. Metal Recovery from WEEE Reclaiming…
Read MoreMagnetic Separators for CRS Overseas Recycling Plant
Bunting-Redditch has completed the manufacture and supply of three (3) magnetic separators and one (1) eddy current separator to recover metals in an overseas recycling plant designed and installed by CRS NI Ltd. CRS NI (Complete Recycling Systems) is a leading player in the UK waste processing market, designing and manufacturing bespoke Material Recycling Facilities…
Read More