Posts Tagged ‘Eddy Current Separator’
Where to see Bunting-Redditch in 2024
Bunting’s magnetic separators, eddy current separators, metal detectors, and electrostatic separators are on tour again in 2024. As of January 2024, Bunting-Redditch is exhibiting at the following shows and conferences: Ceramitec 2024 (9-12 April 2024 – Munich, Germany Ceramitec is the leading international trade fair for the ceramics industry. Ceramic engineers and specialists convene from…
Read MoreVital Metal Recovery from Household Waste
Article first published in Skip & Waste (October 2023) Metal recovery and recycling from waste is not new, with evidence of such activity in Roman times. In modern recycling plants, metal recovery provides a vital financial lifeline. Bunting assists waste management companies in maximising metal recovery whilst maintaining high purity levels. Ferrous Metal Recovery The…
Read MorePhysical Metal Separation at ICBR 2023
Applying physical metal separation technology, such as magnetic and electrostatic separation, is the focus for Bunting at the International Congress for Battery Recycling – ICBR (6-8 September, Valencia, Spain). On booth 17, Bunting’s team of specialist engineers are highlighting technological advances to overcome the challenges of separating and recovering critical metals present in batteries. ICBR…
Read MoreKeeping Plastic Metal-Free at PLAST 2023
Separating and detecting problematic metal contamination is the focus for Bunting at PLAST 2023 (5-8 September 2023, Milan, Italy). Live demonstrations on stand B172 in hall 13P will show equipment including metal detectors, eddy current separators and drawer filter magnets removing metal from virgin and recycled plastic. PLAST, held in Milan, Italy every three years,…
Read MoreMetal Separation from Plastic Flake
A UK plastic recycler has installed a Bunting Metal Separation Module to separate ferrous and non-ferrous metal from plastic flake. The Metal Separation Module features Vibratory Feeders, a Drum Magnet, and an Eddy Current Separator. The successful recycling of plastic waste is often hindered by the presence of contamination, including ferrous and non-ferrous metals. In…
Read MoreMetal Recovery Solutions at E-Waste World Conference 2023
The effective recovery of valuable metals is an important step in the economic viability of recycling e-waste. Technology that maximises metal recovery and purity is the focus for Bunting on stand 110 at the E-Waste World Conference & Expo (28-29 June 2023, Frankfurt, Germany). The Bunting team is joined on the stand by local representative…
Read MoreMetal Recovery at IERC 2023
Technology enabling the separation and recovery of small and often fine metal is important when recycling electronics. On stand 33 at the 21st International Electronics Recycling Congress IERC 2023 (January 18-20, Salzburg, Austria), Bunting’s technical team will highlight the rise in the use of specialist metal separators including the ElectroStatic Separator, Eddy Current Separator, and…
Read MoreRecord-Breaking Year for Bunting-Redditch
Bunting-Redditch registered a record-breaking sales output in 2022. Despite the global economic challenges, the demand for Bunting’s metal separation equipment has never been higher. Equipment sales to companies in the recycling, plastics, mining, and mineral processing sectors drove sales growth in the year. “The extension to our premises [in 2020-2021] has enabled us to make…
Read MoreZixtel Evolves with Bunting’s Eddy Current Separator
The Zixtel evolution began in the midst of the global pandemic in 2020, when the company changed their focus to recycling and purchased the Bunting Metal Separation Module. Zixtel Ltd have since developed a reputation for metals recovery from a wide range of waste electrical and electronic equipment (WEEE) and waste discarded by other recycling…
Read MoreRWM Letsrecycle Live 2022 Review
This was the first year that the UK’s two recycling shows combined to stage RWM Letsrecycle Live 2022 at the NEC in Birmingham UK. The exhibition featured an outer live exhibition area, showing larger recycling equipment, and an internal area with companies across the recycling spectrum. The two-day exhibition welcomed both UK and international exhibitors…
Read More